MultiPair Grid Overlap

Add to wishlistAdded to wishlistRemoved from wishlist 4


Out of stock

MultiPair Grid Overlap reached 3 times 1000 % gain at real verified accounts

  • Platform : MT4 (soon will be also available in MT5 multipair tester optimisation for clients)
  • Minimal Start Balance: a) 30 000 USCents at Cent Account at Roboforex Broker ; b) $10 000 at ECN account Type any Broker
  • Minimal leverage: 1:500 and higher
  • Average Monthly Profit : from 25% up to 100%
  • MaxDrawdown: up to 30% in Grid Strategy and up to 10% in Scalping Mode
  • Automated & Semi-Automated Modes for more profit

Parameters of EA MPGO

PairsForTrading=EURGBP;EURAUD;EURNZD;EURUSD;EURCAD …. etc up to 28 FX pairs and XAUUSD (do noy work at GOLD or DAX ! Only PAIRS XXX/YYY)

Robot can work from 1 chart at all pairs ! [1-28] but its not nessesary to use all 28.  You may enter from 1 up to 28 pairs and each pair will share the same EA settings. Please input all required pairs and separate them using symbol [ ; ] as above, and at the end of last pair do not input anything. Add also Suffix for your pairs if broker have them: EURUSDx;GBPUSDx; or EURUSD.m;GBPUSD.m;…If you wish to trade any pairs with separate EA settings then open a separate chart and enter alternative settings as required.(*Note – For XAUUSD – latest version support trading at XAUUSD from 1 chart with all pairs with same pips parameters. In strategy Tester of MT4 please use Only 1 Pair in this parameter and use 1 pair Indicator type of entry! MT4 tester cannot open orders in Tester more then at 1 pair !!! MT4 tester cannot analyseMutipair indicators!!! Dont try to run multipair IndexAll entry or robots in tester of MT4 –  you will have ZeroDivide Error! Multi-pair Tester Metaquotes coded only in MT5). In version v3.1.4.0 to use signal Index_all need to entry all 28 pairs in PairsForTrading parameter (indicator use all 28 pairs to build 8 indexes and signals) there you can copy 28 pairs if need : EURGBP ; EURAUD ; EURNZD ; EURUSD ; EURCAD ; EURCHF ; EURJPY ; GBPAUD ; GBPNZD ; GBPUSD ; GBPCAD ; GBPCHF ; GBPJPY ; AUDNZD ; AUDUSD ; AUDCAD ; AUDCHF ; AUDJPY ; NZDUSD ; NZDCAD ; NZDCHF ; NZDJPY ; USDCAD ; USDCHF ; USDJPY ; CADCHF ; CHFJPY ; CADJPY

LoadHistoricalData = True // EA will update your all MarketWatch tick data and all TimeFrames once per 1 hour automatically for indicators correct work. Also EA will do same first time when you attach it on chart (patience – it can take up to 5 minutes and will not open any trades until not finish it process )

TimeStartEnd = True // Use Trading Time Filter – Yes/No…HourStart = 0; // Time for EA start work if all orders are Closed…HourEnd = 20 // Time for EA start work if all orders are Closed…HourEnd = 20 // Time of Trading for EA based at MaxEquityProfit! If you entry HourStart=8 and HourEnd=20 (by your broker server time) it means EA will trade between this time and try to reach MaxEquityProfit MANY TIMES ! If after HourEnd=20 robot see that at account Equity StartDepo(Depo0) – robot will Close all orders at account to fix even Little Profit Today and Depo0 EA will rewrite to Current balance! If You dont like to use new Daily Time of trading! Make like this: HourStart=0 and HourEnd=25 (its impossible parameters).

VisualButton = true // show control panel buttons or not. This software is designed not only for Automated trading type but also to perform in semi-automated mode for bigger profit (user control and help EA from time to time, i.e. close current profits reached, add trend orders in hedge of global direction, additional pending orders for News trading across the price, change temporary Equity Targets to start OverLap function … etc) . TurnOff this parametr in Tester and Optimisation – Ea will work faster, also TurnOff if you work in Total Automated mode

NoNewTrade = false // if true – after EA reach Target Equity and close all orders att Account (including your manual and other EAs orders) EA will not open any new order in any direction . But if Before EA reaching target – it can open new orders in serials that already exist to try reach target equity and will not open any new Serials (or Start orders of new Serial). This parameter for thous who need only daily target+ EA Stop and no new Serials or orders today. To make EA working one more cycle and reach new TargetEquity just make NoNewTrade = false (EA Start to trade) and after EA just opened orders – you can make again NoNewTrade = true if you like EA Stopped after its reached Target Equity (at same time you can control EquityTarget % from EA buttons if you like). If activate this parameter in True – so EA not entry at NEW PAIRS even if signal coming, its only continue work at existed pairs that have already orders to finish current serial till TargetEquity, or EA will use LastTp at every order if all orders goes profit…

TradeBuy = true // if false – ea will not open any Buy order……PairsOnlyTradeBuy = EURUSD ; GBPUSD; NZDUSD // enter there pairs that you would like to trade only Buy (enter also this pairs in 1st parameter called PairsForTrading!!! All Signals Must be OFF to use this option of separame SELL and BUY direction in 1 Set at all pairs!!! )

TradeSell = true // if false – ea will not open any sell order……PairsOnlyTradeSell = EURJPY ; GBPJPY; CADJPY //enter there pairs that you would like to trade only Sell (enter also this pairs in 1st parameter called PairsForTrading!!! All Signals Must be OFF to use this option of separame SELL and BUY direction in 1 Set at all pairs!!! )

NewSerialBuy = true // if false – EA will not open new buy Grid serial trades. It will finish any/all existing buy serial trades

NewSerialSell = true // if false – EA will not open new sell Grid serial trades. It will finish any/all existing sell serial trades

NewLevelBuy = true // if false – no new level grid order in buy serials (level = Next Grid order in Grid serial)

NewLevelSell = true // if false – no new level grid order in sell serials


StartLot = 0.0 // Use in Default 0 . EA dedicate Minimal Start lot of any broker automatically

ReverseStartLot = false // multiplier for only first (start) level of the grid based at Hedge % from opposite serial. It can effect also next grid levels after reversed order in his serial, all lot multiplier will use this order lots to calculate next levels in same direction. Example: EA have 0.1+ 0.1+ 0.1+ 0.2+ 0.3+ 0.4 (sum total 1.2 lot) already opened in Sell direction and will try to open reverse start order in buy using the settings of CoefReverseStartLot below; (he have no buy orders yet) with CoefReveseStartLot = 0.3 (means 30% from 1.2 of sell sum lots) 0.3*1.2= 0.3 lots will be start lot of buy serial. After this ea will continue buy serial like this 0.3 0.3 0.3 0.5 0.7…means it will effect at next orders – they will be bigger than opposite sell serial levels (comparing with FirstLotExp below parameter – that change only 1 start order and all serial think that nothing happened)

CoefReverseStratLot = 0.3 // portion of reverse start lot. if sum sell lots = 1.5 lots ea will try to open 0.3=30% (1.5*0.3=0.5 lots) start order of buy grid serial

FirstLotExp = 1.0 // [1.0-3.0] multiplier only for 1st level of grid that not effect next levels. If FirstLotExp=2 then EA will use multiplier only for 1st level of grid 0.2 0.1 0.1…and will not effect next grid levels. if =1 then ea will open 0.1 0.1 0.1…as usual

Risk = 0.01  // Use 1 time parameter to trade same Risk at all pairs in one Set. To use separate Risks at different pairs in one set entry separate Risks using comma 0.01;0.02;0.01;0.05 …. The number and order of risks should correspond to the number of pairs that you entered in the PairsForTrading parameter

MaxLotRisk = 20.0 // this is max lot for your start deposit in 10 000 that robot can open based at Risk. If your balance grows to 20 000 the EA will understand that 20 max lot was for 10 000 and will automatically adjust this setting for 20 000 will hold MaxLotRisk=40 (as double from MaxLotRisk=20 because start deposit doubled also from 10 000 to 20 000). No need to change it manually from 20 to 40. More balance – mоre MaxLotRiskea will use based at proportion of 10 000 balance. this is why its called MaxLotRisk – based at risk calculation from current balance in proportion for 10 000 Balance.

MaxTrades = 15 // [1-30] how many levels of grid the EA can open in 1 direction at 1 pair. If = 15 it means the EA can open up to 15 sell and 15 buy grid levels per pair (total 30 per 1 pair, no more)

GRID ———

TypeOfOrders = 0 // [0 1 2] 0 – all market orders, 1 – only start orders of serials will be pending orders that follow the price, 2 – all pending orders

TrendStep = 100000 // ea will use only start lot order of serial and continue this in trend every TrendStep pips 0.1 0.1 0.1 0.1 …it some kind of pyramid hedging in trend but with constant same order based at start order of serial. If price retrace after trend – possible this orders will have some minus and need to manage them manually if you used this function. (Also if profit – this orders can be used in VirtualTrailingStop below parameter to trail them)

PIPsStep = 10 // minimal step between 2 market type grid levels (orders) 0.1-PipsStep-0.1-PipsStep-0.1-PipsStep-0.2 . Ea will use this distance between levels only if you use non-indicator modes and only Market Types of orders (pending orders type can filter bigger distance because of trail pending orders in trends). Otherwise there will be bigger step<10 because of indicator and pending orders filtering and New function AutoPipStep. In version v3.1.3.3 – once AutoPIPSTEP AutoPipstepADR=True // True = Turn on AutoPipStep , False = Turn Of AutoPipStep. EA can calculate separate AutoPipStep for different pairs based at their HighLow bars at any TF per any candles. If use D1 – it will be ADR – Average Daily Range / divided by some value

AutoPipstepADRTF=1440 // what TF use to calculate Average High-Low ? 0-Current, 1-M1, 5-M5, 15-M15, 30-M30, 60-H1, 240-H4, 1440-D1

AutoPipstepBars=20 // how many bars back EA take to calculate AutoPipStep at AutoPipstepADRTF(including Current Bar that not closed yet)

AutoPipstepADRdivider=6 // EA will look at 19 bars back + 1 bar (current bar) and will calculate “Averages of their High-Low-s”, and will divide it to 6 (AutoPipstepADRdivider). The found value will be AutoPipStep for Current pair (for all pairs will be different personal AutoPipStep in this case)

PendingFollowDistance = 22 // [10-50] If you use TypeOfOrders = 1 or 2, the EA will start to use pending Stop orders to filter price. If price go up – the EA will follow current price (like a trailing stop) with sell stop order at a distance of 22 pips under the price. A good filter to not open many orders opposite the trend direction or price spikes and can be used also as additional temporary filter at news trading (this parameter will be used only in TypeOfOrders = 1 & 2)

PendingFollowStep = 2 // [1-5] if price runaway from pending stop order ea will replace every 2 pips PendingFollowDistance to follow the price if its become > then 22 pips (PendingFollowDistance = 22). Similar to trailing stop working – we can call it trail of Pending Stop orders (this parameter will be used only in TypeOfOrders = 1 & 2)

FirstLotExponent = 1.0 // [1.0-3.0] multiplier for next levels of the grid after Start Orders of Serial up to level NumberOfLevel2ndLE = 5 . if FirstLotExponent= 1 ea will open 5 first orders of grid like this : 0.1 0.1 0.1 0.1 0.1 . If =2 ea will open 5 next orders with lot sizes : 0.1 0.2 0.4 0.8 1.6 . If = 1.4 ea will open next : 0.1 0.14 0.19 0.27 0.38 . (every next order = previous * FirstLotExponent till SecondLotExponent that can have different value and calculation method)

SecondLotExponent = 1.5 // [1.0-3.0] this lot exponent start working after NumberOfLevel2ndLE = 6 (for example) and use total average lots of current serial * SecondLotExponent . Example : Second lotexp will start work only after #6 level and we opened serial like this 0.1 0.15 0.22 0.33 0.50. Lets calculate #6 level using SecondLE = 1.5; (0.1 0.15 0.22 0.33 0.50)/5 = 0.24 is average lot of current serial. So lot size of #6 level is 0.24 x SecondLotExponent (1.5) = 0.36.  So you see that by smart use of two types of lot exponents can give us serial like this; 0.1 0.15 0.22 0.33 0.50 0.36 (last order even less than previous). It is therefore possible to create serials like this: 0.1 0.1 0.1 0.15 0.22 0.33 0.50 to help you survive in non-retrace trends of price movement using this parameters of 2 exponents.

NumberOfLevel2ndLE = 6 // at what level of the grid ea stop using FirstLotExponent and start use SeconLotExponent


VirtualStopLossPips = 100 // Virtual Stop Loss for every grid order in pips. Brokers do not see physical StopLoss – the EA keep SL pips in memory and closes each order once it reach this value in pips

VSLLevel = 3 // before this level of grid VirtualStopLossPips not working and will start working for grid orders that will be opened after and at this level

LOCK ————

OpenLock = false // if true EA will lock current grid serial with hedge order and drop this serial. EA will not open any new grid order after locking of this serial

LockPercentFromSummary = 0.8 // portion of Hedging . For example you have sell serial 0.1 0.2 0.4 0.8 1.6 = 3.1 summ lot. 0.8 means 80% from 3.1 must be opened in buy to hedge this serial in 80% : 3.1*0.8 = 2.48 lot ea will open in Buy and drop this serial until user will not back to comp and will not decide what to do with that and how to help it. Some kind of protection. recommended only for traders who can open lock in positive. Otherwise better do not use this function at all because it temporary hedge or lock only minus equity, not plus and need knowledge and experience to open negative lock. Good thing that it will not let blow your acc if you use nonindicator mode without limitation in MaxTrades

LockDraw = 15 // what drawdown ea must dedicate at 1 pair to start hedge it with Lock order ?


LastTP = true // if true – ea use Virtual Take Profit for last biggest order in grid serial to close it in profit. Broker do not see (VTP) take profits of this EA

TypeOverLap = 3 // [0 1 2 3] 0 – EA does not use new profit to cancel out old orders to minimiseDrawDown (eat pieces of old orders with Cross-Closing by using New Profit = OverLap); 1- EA will cancel out older orders to minimiseDrawDown starting with the oldest or the very first order; 2- EA will start cancelling out the most recent trade; 3- EA will start cancelling out starting from the second last order. TypeOverlap fixed in New version v3. – if EA cannot use TypeOverlap=3 (when serial do not have 3 orders) it will try use TypeOverlap=2 for 2 orders ! if not possible use TypeOverlap=2 ea will use TypeOverlap=1

CoefLast = 1.0 // portion, how much EA can use from lastTP profit in OverLap function. 1=100% , 0.3 = 30% to eat pieces of old orders by profit/loss in proportion

LastTPPips = 10 // Virtual Take Profit (VTP) of last order of grid. Broker do not see this TP – ea hold this in memory and check every tick. How much pips last order must go in profit to close it by LastTP function of robot. Ea can reopen several times this order and close them to VTP – in flat ea doing lots of profit and rebates. LastTPPips after version always = AutoPopstep at your separate pair! Also in Fumction of Autopipstep added protection from low pipstep in Flat

LevelStartLastTP = 1 // [1..10] at what level of grid ea start use LastTP (or VTP) function . (cannot equal = 0 or ea will show Error. First minimal level of Grid =1

LastTPFixedPips = False // if True – EA will always use constant LastTPPips for Take Profit that disconnected from Autopipstep. If False – EA use LastTPPips = AutoPipstep, but LastTPPips cannot be < PipStep (protection from low AutoPipstep and low LastTPPips) VIRTUAL TRAILING STOP ——————— TrailGo = true // use virtual trailing stop (VTS) ? it make sense use in True only if you use LevelStartLastTP > 1 [2-3] and you need to trail sometimes start orders

Tak = 30 // Profit in pips to start using VTS in Grid Ordes

StepTak = 2 // step to move VTS for profit order to follow current price with distance TrailDistance

TrailDistance = 10 // minimal Trail Stop from current price where ea follow SL in profit for order. ( Learn your broker StopLevels for SL! )


BuyGridMagicNumbers = 1000 // Start order of Buy serial will have 1000 magic number. All next levels +1. 1000 1001 1002 1003 ……SellGridMagicNumbers = 4000 // Start order of Sell serial will have 4000 magic number. All next levels +1. 4001 4001 4002 4003 …


CloseTP = True // If true we use function Virtual TP from BreakEven + some pips called TakeProfit

ColCloseTP = 3 // ea take 1 pair (sell or buy separate) breakeven level and add TakeProfit=10 pips to close this serial. ColCloseTP means from what level of grid it will start to work. If ColCloseTP = 3 it means after 3 level of grid EA will close all orders at Sell or Buy if they not closed by LastTP or Trailing Stop once this 3 or more orders are in profit pips now = BreakEven+TakeProfit

TakeProfit = 10 // how many pips form break even in plussea must see to cloase all serial ( in buy or sell ) if CloseTP activated and we already have ColCloseTP = 3 orders in this separate direction serial


CloseEquity = true // Robot will create in memory of MT4 Global Variables (GV) called  Depo0 that equal to your Start Balance  when at account No orders (press F3 is MT4 to see Global Variables). It will be Start point for calculation % of profit from StartBalance. EA take Depo0 and add  MaxEquityProfit = 5 %. That will be Target in Equity to Close All Orders at Account (including your manual or other EAs orders too). Once you attached EA at EURUSD chart – and EA created Depo0 in GV it will start collect new Balance untill we reach TargetEquity value by current balance. But at same time our Current Equity will be less then current balance because of drawdown at old orders! Next what EA will do – it continue collect new balance profit in LastTP function, but every new additional balance, that more TargetEquity value, EA will use in OverLap Function to EAT pieces of orders from old drawdown.

MaxEquityProfit = 5 // how much current equity most be bigger in % then Depo0 or StartDepo (when serial started). After ea will finish current serial and close all orders he will change (rewrite) Depo0 = as CurrentBalance for new future serial. If you have opnedordes at account and you like to Deposit more Money – turn off EA, change Depo0 (in Global varialbe) to new expected Balance or balance where you like to start Function OverLap. Check if all Correct. Turn On EA after Deposit. During Updates at New Version – if you have opened orders at acc please do not Delete Global Variable (New version will use old version GV) because you can loose part of balance.


FirstGridOrderSignal = false // use activated indicators as Signal in EA at grid start orders in New Serials ?

AllOtherGridOrdersSignal = false // use activated indicators as Signal n EA at Next grid levels after StartOrders ?

OnlyOneTypeOrders = False; // If True – opposite signal will close current signal orders (if EA traded into Buy signal and Sell signal coming EA will close all Buy orders at this pair and start trade Sell signal)


PARAMETRS SAR  (How to use SAR indicator in EA )…TypeSarFiltre = 0; // 0-Off. 1- not constant Signal only if Sell P-SAR change to BUY or BUY to SELL at SAR_TF (lowTF) & Higher SAR_TF_T must show same dirrection (for scalpers with maxtrades=1). 2-Constant signal when 2 TF looks same direction. 3-Constant signal when 2 TF looks different direction (SAR_TF trade to SAR_TF_T)…Sar_Step = 0.02; // sarind parameter…Sar_maximum = 0.2; // sarind parameter…SAR_TF = 15; // Low SAR TF. timeframe where ea read SAR ind. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…SAR_TF_T = 240; // High TF. timeframe where ea read SAR ind. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…SAR_Signal_BAR = 1 // 0=Current bar, 1= one bar beck before current 0; 2= two bar beck before current 0… its a Bar where EA compare 2TF SAR signal

PARAMETERS All_Index…All_Index = 1 // 0=Off . 1, 2, 3, 4, 5 = ON. Learn more about Multipair Index_ALL_MA entry there –…SignalBar = 1 // EA will use previous(1) and pre-previous(2) bar to compare indexes…LevelRevSign = 2000; // value of indicator for reversal trading…Index_TF = 60 // what tf EA will use to read Index_All values 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…Suffix = ”  ” // if your pair have suffix enter it there EURUSDx…ControlBars = 50 // how much last bars Index_All indicator take to analyze and paint

PARAMETERS TMA (How to use TMA indicator in EA…TypeTMAFiltre=0; // What type of TMA Filter EA must use :…0 – off,…1 – if price go out TMA Channel – EA will open order to expect price will back inside channel of TMA….2 – if price go out the channel EA will open order to continue this trend – breakout signal (opposite signal to type1)….3 – price  go out the channel and bar must be closed outside the TMA channel, after this once price touch channel EA open order to expect price will back inside channel (same direction signal as type1)…4 – Double TF TMA Fast and Slow based at 2 TMA indicaotrs (in tester work from Slow TF). Sell signal once upper band of Fast TMA will be > than upper band of SlowTMA. Buy signal once lower band of FastTMA will be < than lower band of SlowTMA) 5 – EA use Central line of SlowTMA and compare it with MA. If MA < CentralTMALineits a Buy Signal, if MA > CentralTMALine – its a Sell signal…6 – EA compare Current Price with Upper and Lower band + MA with Central Line of SlowTMA indicator. For SELL price must go outside upper band of SlowTMA and  MA must be higher Central line of SlowTMA. For BUY price must go down outside lower band of SlowTMA and  MA must be lower Central line of SlowTMA…7 – Sell signal between Upper and Central line of SlowTMA. Buy Signal between Lower and Central line of SlowTMA indicator. This method do not signal outside TMA bands!…8 – same entry point as DoubleTFTypeTMAfiltre=4 but it hold and Continue this Signal inside SlowTMA until TypeTMA=4 will not show opposit signal…9 – samilar entry point as DoubleTFTypeTMAfiltre=4 (fast TMA must go out Slow TMA ) but it hold and Continue this Signal inside SlowTMA  (higher TF) until TypeTMAFiltre=4 will not show opposit signal and (!!!) Price must go out from 2 TMA Chanelsourside

TMA_TimeFrameFast= 60; // Fast timeframe where ea read TMA ind (addditional Fast parameters use only for TypeTMAFiltre=4 and 8. ). EA Must be attached at TMA_TimeFrameFast= 60 (it will be Visual TF)…TMA_TimeFrameSlow = 60; // Slow timeframe where ea read SlowTMAind values (1 TF methods only for TypeTMAFiltre=1 2 3 5 6 7). 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…TMA_HalfLengthFast = 56; // FastTMAind parameter…TMA_HalfLengthSlow = 224; // SlowTMAind parameter…TMA_PriceFast = 0; // 0=PRICE_CLOSE ; 1=PRICE_OPEN; 2=PRICE_HIGH; 3=PRICE_LOW; 4=PRICE_MEDIAN (high+low)/2; 5=PRICE_TYPICAL(high+low+close)/3; 6=PRICE_WEIGHTED (high+low+close+close)/4)…TMA_PriceSlow = 0; // 0=PRICE_CLOSE ; 1=PRICE_OPEN; 2=PRICE_HIGH; 3=PRICE_LOW; 4=PRICE_MEDIAN (high+low)/2; 5=PRICE_TYPICAL(high+low+close)/3; 6=PRICE_WEIGHTED (high+low+close+close)/4)…TMA_ATRMultiplierFast = 2.0; // FastTMAind parameter…TMA_ATRMultiplierSlow = 4.0; // SlowTMAind parameter…TMA_ATRPeriodFast = 100; // FastTMAind parameter…TMA_ATRPeriodSlow = 400; // SlowTMAind parameter…TMA_InterpolateFast = true; // FastTMAind parameter…TMA_InterpolateSlow = true; // SlowTMAind parameter

PARAMETERS CCI (How to use CCI indicator in EA )…TypeCCIFiltre=0; // 0-off , 1-if CCI > +CCI_Val EA trade SELL, if CCI<-CCI_Val EA trade BUY. 2-Opposite signal to type1 CCI_TF = 60; // timeframe where ea read CCI. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…CCI_period = 14; // CCI ind parameter…CCI_Price = 0; // 0=PRICE_CLOSE ; 1=PRICE_OPEN; 2=PRICE_HIGH; 3=PRICE_LOW; 4=PRICE_MEDIAN (high+low)/2; 5=PRICE_TYPICAL(high+low+close)/3; 6=PRICE_WEIGHTED (high+low+close+close)/4)…CCI_Val = 100; // [5..300] CCI ind parameter

PARAMETERS TurboJrsx…TypeTurboJrsxFiltre=0; // 0-OFF ; 1-ON SELL 2>3 & 2>1 ; 2-ON SELL 2>1 ; 3- SELL once ind at Bar=TurboPreLastBar1 become >TurboJrsx_ValUP & BUY once ind at Bar=TurboPreLastBar1TurboJrsx_TF = 1; // 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…Len = 14; // ind period…TurboJrsx_Price = 0; // PRICE_CLOSE=0…TurboPreLastBar1=1; // means Current bar-1…TurboPreLastBar2=2; // means Current bar-2…TurboPreLastBar3=3; // means Current bar-2…TurboJrsx_ValUP = 70; // > 70 Sell…TurboJrsx_ValDOWN = 30; // < 30 Buy


TypeCanalMAFiltre=0; // 0=Off. 8=same as TMA8 but also with trend signal when 2 fast lines go out slow CMA Channel. 9= For sell: upper red line of Fast indicator > upper red line of Slow indicator  + Previous Bar must be Closed lower Central line of Fast CMA indicator…CanalMA_TF = 15; // visual period to trade CMA  and attach tpl…CanalMA_PeriodFast = 5; // fast period of first ind of Double Indicator Method…CanalMA_PeriodSlow = 60; // slow period of second ind of Double Indicator Method…ENUM_MA_METHOD CanalMA_Method = MODE_EMA;

PARAMETERS WATR (How to use WATR indicator in EA )…TypeWATRFiltre=0; // 0=off . 1=On 1 TF; 2=Double TF Watrind signal (2 TF look same direction); 3-Double TF Watrind signal (2 TF look different direction : Fast trade to Slow);…WATR_TF_Fast=0; // Timeframe where EA read WATR ind. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…WATR_TF_Slow=0; // Timeframe where EA read WATR ind. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1…WATR_K=0; // K period of watr ind….WATR_M=1;// M period of watr ind….WATR_ATR = 21 // ATR period of watr ind.

PARAMETERS SNAKE+MA (How to use SNAKE+MA indicators in EA

TypeSnakeFiltre = 0; // 0=Off . 1=On

Snake_TF = 15;  // Timeframe where EA read SNAKE ind. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1

Snake_HalfCycle=7;  // best if it will be same as MA_period

MA_period=7;            // Moving Average period

MA_Method  = 1;     // Moving Average Method: 0=Simple averaging; 1=Exponential averaging; 2=Smoothed averaging; 3=Linear-weighted averaging

MA_Price   = 0;        //

MA_TF    = 15;          // Timeframe where EA read MA ind. 0=Current TF where EA attached at Chart; 1=M1; 5=M5 15=M15; 30=M30; 60=H1; 240=H4 1440=D1

PARAMETERS RENKO BARS M2 FILTER ————(How to use Renko signals: )

TypeRenkoBarsM2 =2; // 0-EA not use Renko Bars Filter. 1-How much consistent ColoredRenkoBars must be in History before current not closed renko bar. 2-EA look at LastRenkoBarsHist=5 or 4 or 3 to dedicate much not consistent ColoredRenkoBars was in this History to make trend entry (Posible combinations for TypeRenkoBarsM2=2 : [2:3] [3:4] [3:5] [4:5] )…ColoredRenkoBars = 2; // How much renko bars (consistent or not consistent dipends from TypeRenkoBarsM2=1 or 2 choosed) EA need to dedicate at LastRenkoBarsHist bars for signal entry…LastRenkoBarsHist = 3; // How much renko bars EA look in history without including Current Bar – this value can be [max 5, 4, 3 min] and will not be used in TypeRenkoBarsM2=1 (TypeRenkoBarsM2=2)…Renko_TF = 2; // do not change this Parameter if you opened all Renko Charts (generated by some other EA) at M2 and this pairs posted in parameter PairsForTrading. If you will choose standard timeframes 1 5 15 30 60 240 1440 – in this case EA will do price action trading at this TimeFrames using same logic without renko bars

Specification: MultiPair Grid Overlap

Trading Terminal

Metatrader 4

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “MultiPair Grid Overlap”

Your email address will not be published. Required fields are marked *

1 expert ex4 / indicators / include files/ scripts / libraries files



Advisor name:  Multi-pair-Grid-OverLap

The settings and their values are described on the seller’s website. 

Register New Account
Reset Password
Shopping cart